Fiber optic connector is a mechanical device used to align and join
two or more fibers together to provide a means for attaching to and
decoupling from a transmitter, receiver, or any other fiber optic
equipment or devices. Ferrules are used to do the precise alignment
for the connectors. Single mode needs higher precious for
The pre-assembled, one piece body design and the pre-polished
ferrules provide quick and economical terminations both in factory
and in-the field settings. Also, with the pre-polished ferrule, an
uniform end-face geometry is ensured, resulting in consistent
·Meets TUV, ISO9001, TLC, EIA / TIA, IEC NTT and bell core GR
·All types of connectors available: SC / LC / FC / ST / MT-RJ / MU
/ E2000 / MPO / D4 / DIN / SMA /FDDI / ESCON
·Superior qualified standard: PC / UPC / APC polishing
·Φ0.9mm, Φ2.0mm and Φ3.0mm housing and boot available.
·Different type housing and boot for your choice.
·Single mode (9 / 125) or multimode (50 / 125 or 62.5 / 125)
·Simplex / Duplex Connector available
·100% optic test (insertion loss and return loss)
·Customized specifications welcome!
·Connectors can be supplied as a pre-assembled one-piece or as a
·Clips are available for duplex connectors for SC and LC
Insertion loss PC/UPC≤0.2dB
Return loss PC/UPC≥50dB
Repeatability (500 matings) ≤0.2dB